Products

Acrel ARTM-Pn Wireless Temperature Display Device

● Wireless temperature measurement, maximum measuring 60 points;

● DO/DI Function: 2 Over-temp Alarm Relay Outputs & 4 Digital Inputs;

● LCD display;

● Dimension: 96*82*96mm (L*W*H)

● Auxiliary power supply adapts with AC220V, DC220V, DC110V, AC110V;

● Electric Parameter Meausurement: U,I,P,Q,F,kWh,kVarh (Optional);

● 1 RS485 serial communication, Modbus-RTU.

Email: [email protected]

Mobile: +86 134 8217 7205

Whatsapp/Wechat: +86 134 8217 7205

Overview
Certificates
Customer Questions & Answers
Contact us

Application

HV CONTACT TEMP.MONITORING
HV & LV BUS BAR TEMP.MONITORING
CAPACITOR TEMP.MONITORING
REACTANCE TEMP.MONITORING
LV CABLE JOINT TEMP.MONITORING
MOTOR TEMP.MONITORING
TRANSFORMER TEMP.MONITORING
INDOOR CABINET CABLETRENCHES TEMP.MONITORING
Network

Overview

ARTM-Pn series wireless temperature controller was developed according to the technical requirements for wireless temperature measuring devices in the NB/T 42086-2016 standard. The wireless temperature controller is suitable for use in both 3~35 kV indoor switchgears including metal-enclosed switchgear, ring main unit, fixed switchgear, and 0.4 kV low voltage switchgears including fixed switchgear, withdrawable switchgear.

Parameter

Functions	Sensor: ATE100, ATE200, ATE300B, ATE300, ATE400 Temperature precision: ±2℃ Sensor number: 60
Auxiliary power upply	AC 85~265V, DC 100~300V Power consumption: 8W
Communication	Protocol : Modbus-RTU Rear port: RS485 Baud rate (bps): 2400,4800,9600,19200
Environmental requirement	Operating temperature: -10℃~55℃ Relative humidity: ≤95% Atmospheric pressure: 86kPa~106kPa Average work time without stoppage: ≥50000 hour