EV Charging Piles DC Insulation Monitor AIM-D100-CA
DC insulation monitor
DC system of 0~1000V
- Customer Questions & Answers
- Contact us
AIM-D100-CA series DC insulation monitor can be applied in DC system of 0~1000V, used for on-line monitoring of DC ungrounded system positive and negative pole to ground insulation resistance, when insulation resistance is lower than the set value, it will send out warning or alarm signal.
The product is mainly designed for DC 0~1000V range of electric vehicle charging device insulation monitoring, but also can be applied in energy storage DC, substation DC screen, UPS power supply system, photovoltaic DC system and other DC power grid DC system.
Resistance monitoring. The product can monitor the insulation resistance of the positive and negative poles of the DC system to the ground. When the insulation resistance is lower than the set warning and alarm values, it can send out warning and alarm signals.
Voltage monitoring. The product can monitor the voltage between the positive and negative poles of the DC system and the voltage between the positive and negative poles with respect to ground. The measurement range is 0~1000V.
Current monitoring function. The product can monitor the current of DC system, only the AIM-D100-CAI model has this function.
LED indication. The product panel has operation, communication, and fault LED indicators to display product status.
Communication networking function. The product has RS485 interface and adopts Modbus-RTU protocol for data exchange.
Metal casing. The product adopts a metal shell and can be wall-mounted or installed using accessory rails.
Plug-in terminals. The product adopts plug-in terminal wiring, which is convenient for wiring and installation.
|Maximum power consumption
Connect with current shunt base on rated current; CAI models only
|Insulation resistance range
|Warning and alarm range
|1~10kΩ: ±1k; 10k~500k: ≤3%
|System leakage capacitance
|Insulation monitoring speed
|RS485 interface, Modbus-RTU protocol
Wall-mounted installation or
DIN-rail installation (plastic stent included)
|<95%, without condensation
Shape and Size
The overall dimensions of the AIM-D100-CA DC Insulation Monitor are shown in the figure below. (Unit: mm)
The overall dimensions of the AIM-D100-CAI DC Insulation Monitor are shown in the figure below. (Unit: mm)