All Categories
EN

Home > Products > Energy Meter > Panel Meter

Acrel APM810 Panel Mounted 3 Phase Digital Energy Meter


● True RMS Measurements


● THD with 63rd Harmonics


● K-Factor and Crest Factor


● Unbalance & Phase Angles


● Demands and Multi-Tariff energy


● Max/Min Log with Timestamp


● Harmonic: 1%(2~42nd), 2%(43~63rd)


● Accuracy: 0.5s

Email: [email protected]

Mobile: +86 134 8217 7205

Whatsapp/Wechat: +86 134 8217 7205

  • Overview
  • Parameter
  • Certificates
  • Customer Questions & Answers
  • Contact us

APM series meters have full power measurement, energy statistics, analysis of power quality and network communications and other functions, are mainly used for comprehensive monitoring of the quality of power supply network.


6-1




① Type of Parameters
② Load Value
③ Total Power
④ DO Status Indicator
⑤ Menu
⑥ Key Down
⑦ Data Display
⑧ Navbar
⑨ DI Status Indicator
⑩ Enter Button
⑪ Key up


Function


Accuracy
Voltage、current and power: Class 0.2
Active power: Class 0.5S; Reactive power: Class 2

Pulse Output
Output mode: Optocoupler pulse with open collector;
Pulse constant: 4000 (5A)、8000 (1A) imp/kWh;

Consumption
Voltage、current: Power consumption: <0.5VA;
Auxiliary power supply: Power consumption ≤15VA

Starting Current: 0.1%

6-2


6-3   




Installation: Panel mounted

Frequency: Range: 45-65Hz

Relay: 3A/AC250V, 3A/DC30V

Dimension (L*W*H)
Panel size (L×W): 96*96mm
Cut-out size (L×W): 92*92mm

Auxiliary Power Supply
AC/DC 85V~265V or AC/DC 115~415V


Display


6-4

Technical ParametersIndex
SignalElectrical networkThree-phase three-wire, three-phase four-wire, see the wiring diagram;
Frequency45~65Hz;
VoltageRated value:AC 100V、110V、400V、690V;
Overload: 1.2 times rated value(continuous); 2 times rated value /1 second;
Power consumption: < 0.5VA (per channel);
CurrentRated value: AC 1A, 5A, support 4 mm2 line access;
Overload: 1.2 times rated value(continuous); 10 times rated value/1 second;
Power consumption: < 0.5VA (per channel);
Measurement accuracyVoltage、current and powerclass 0.5s/class 0.2s (APM800、APM810/APM801)
Active powerclass 0.5s/class 0.2s (APM800、APM810/APM801)
Reactive powerclass 2
Harmonic1%(2rd~42nd)、2%(43rd~63rd)
Switch inputsDry contact inputs, built-in power supply;
Relay outputsContact type: open contact in main part, changeover contact in module;Contact capacity:AC 250V/3A  DC 30V/3A;
Pulse output of energyOutput mode: Optocoupler pulse with open collector;Pulse constant:4000(5A)、8000(1A) imp/kWh;
Analog outputsDC 0mA~20mA、4mA~20mA、0V~5V、1V~5V output, accuracy class 0.5%, load resistance ≤ 500Ω;
Analog inputsDC 0mA~20mA、4mA~20mA、0V~5V、1V~5V iutput, accuracy class 0.5%
Storage cardStandard Capacity:4G,TF Card Up to 32G Capacity;
CommunicationRS485 interface/Modbus-RTU protocol and DLT645 protocolProfibus-DP interface/Profibus-DP protocol;RJ45 interface (Ethernet) / Modbus-TCP, http, DHCP and other protocols;
Power supplyWorking range: AC/DC 85V~265V or AC/DC 115~415V(P2);Power consumption: Power consumption of the main part ≤ 15VA;
SafetyPower frequency withstand voltageThe power frequency withstand voltage between the shell and the auxiliary power supply, each input and output terminal group is AC 4kV/1min;The power frequency withstand voltage between the auxiliary power supply and each input and each output terminal group is AC 2kV/1min;The power frequency withstand voltage between the voltage input and other input/output terminal groups is AC 2kV/1min;The power frequency withstand voltage between the current input and other input/output terminal groups is AC 2kV/1min;The power frequency withstand voltage between the relay output and other input/output terminal groups is AC 2kV/1min;The power frequency withstand voltage between each terminal group of switch input, communication, analog output and pulse output is AC 1kV/1min;
Insulation resistanceInputs、outputs to the shell>100MΩ;
Electromagnetic compatibilityMeet IEC 61000 standard (Level 4);
Protection levelDisplay panel IP52
EnvironmentOperating temperature: -20 °C ~ +65 °C;Storage temperature: -20°C~+70°C;Relative humidity: ≤95% without condensation;Altitude: ≤2500m;
StandardsIEC 60068-2-1IEC 60068-2-2IEC 60068-2-30Environmental Testing-Part 2-1:Tests Test A:Cold IDAPart 2-1:Tests Test B:Dry heatPart 2-30:Tests Test Db:Damp heat,cyclic(12+12h)
IEC 61000-4Electromagnetic compatibility-Testing and measurement techniques
IEC 61557-12Electrical safety in low voltage distribution system up to 1000V a.c. and1500V d.c –Equipment for testing,measuring or monitoring of protective measures- Part12:Performances measuring and monitoring devices(PMD)
IEC 62053-22Electricity metering equipment (a.c.)-Particular requirements - Part22:Static meter for active energy(class 0.2s and 0.5s)


Wiring


6-5


Network


6-6


Installation


6-7

① Cut out a 92*92mm hole on the panel. (If not existed)


6-8

② Unleash all the static, move off installation  terminal, put in the panel.


6-9

③ Fixed the meter on panel by using the incidental brackets with buckle.


6-10

④ Installation complete.



Application



6-11

Mining


6-12

Petrochemical


6-13

Building


6-14

Hotel


6-15

Municipal Project


6-16

Transportation


6-17

Hospital


6-18

Electric Safety



Package


MINIMUM PACKAGE6-196-20
MINIMUM PACKAGEPackage Dimension(1 PC)
170*150*130mm
WHOLE BOX PACKAGEPackage Dimension(36 PCS)
540*530*480mm


MINIMUM PACKAGE6-216-22
MINIMUM PACKAGEPackage Weight(1 PC)
0.372Kg
WHOLE BOX PACKAGEPackage Weight(36 PCS)
14.5kG


ATTENTION !
The above packing and weight data are only refer to model APM810.
For other models or optional functions, please contact the salesman for details, thank you for your cooperation!

Customer Questions & Answers
    Did not match any questions!
Your Name
E-mail *
Phone/Whatsapp
Country
Your identity (dealer or individual)
Your Inquiry *
Clicky