All Categories
EN

Home > Products > By Application > New Energy

AIM-D100-T series universal DC insulation monitor


Applications: DC panels for power generators, substations, electric vehicle charging devices, UPS power supply systems, photovoltaic DC systems, energy storage systems and other DC power grids and other DC systems

Voltage range: DC 100~1000V;DC 10~100V

LCD display

Modbus-RTU protocol


  • Overview
  • Customer Questions & Answers
  • Contact us

Overview

  With the development of industry, many electrical equipment and factory equipment are powered by DC system, and the positive and negative poles of DC system are not grounded. For ungrounded (IT) power distribution systems, insulation resistance should be monitored to ensure the safe operation of the power supply system.

  AIM-D100-T series DC insulation monitor can be applied in 10~1000V DC system, which is used to monitor the insulation resistance of the positive and negative poles to the ground of the DC ungrounded system online, and send out an early warning or alarm signal when the insulation resistance is lower than the set value.

  The product is based on the principle of unbalanced bridge, which avoids the problem that the balance bridge cannot detect the insulation resistance when there is a ground fault at the positive and negative poles at the same time.

The products can be used in DC systems such as power generation manufacturers, DC panels of substations, electric vehicle charging devices, UPS power supply systems, photovoltaic DC systems, energy storage systems and other DC power grids.

Function

image

Resistance monitoring function. The product can monitor the insulation resistance of the positive 

and negative poles of the DC system to the ground, and can send out early warning and alarm 

signals when the insulation resistance is lower than the set early warning and alarm value.

Voltage monitoring function. The product can monitor the voltage between the positive 

and negative electrodes of the DC system, and the voltage between the positive and negative electrodes to the ground.


Over/undervoltage alarm function. The product can monitor the voltage fluctuation of the DC system,

 and can send out an alarm signal in time when there is overvoltage or undervoltage.

Early warning and alarm function. The product has 2 sets of independently adjustable set values, 

which can set early warning values and alarm values.


LED indication function. The product panel has operation, communication and fault, overvoltage, and undervoltage LEDs, which can display the product status.


LCD display function. The product adopts 128*32 dot matrix liquid crystal display, which can display parameter information.


Relay output function. The product has 3 relay outputs, and can choose normally open or normally closed mode.


Event logging function. The product can record the time of alarm occurrence and the type of fault, which is convenient for staff to troubleshoot.


Communication networking function. The product has 1 RS485 interface and adopts Modbus-RTU protocol, which can be used for data interaction.


Rail mounting. The product is installed on a standard 35mm guide rail.


Plug and unplug the terminals. The product adopts plug-in terminal wiring, which is convenient for wiring and installation.

Parameter

ItemTechnical Specifications
Auxiliary power supplyDC 9~36V
The maximum power consumption≤6W
Voltage monitoring Voltage range

AIM-D100-TH:DC 100~1000V;

AIM-D100-TL:DC 10~100V

Measurement accuracy0.5 class
Overvoltage threshold≥ 110% of rated voltage
Undervoltage threshold≤90% of rated voltage
Insulation monitoringinsulation resistance range1kΩ~10MΩ
The early warning alarm range10kΩ~10MΩ
Measurement accuracy1~10kΩ:±1k;10k~500k:≤3%
System leakage capacitance≤5μF
Insulation monitoring mode Periodic trigger

5~500s delay can be set;

Communication trigger: read on demand

Insulation monitoring time500ms/time, 1000ms/time
Internal DC impedance<1MΩ
Alarm modeLCD, LED indicator, relay output
Alarm output3 groups of relay outputs, normally open or normally closed can be set

Appearance and installation

The AIM-D100-T series DC insulation monitor has a plastic case, and its dimensions are shown in the figure below. (Unit: mm)

image

AIM-D100-T series insulation monitor adopts the installation method of guide rail, the instrument is mounted on a standard 35mm guide rail, and fixed with a buckle, and the installation can be completed. As shown in the figure below:

image

Customer Questions & Answers
    Did not match any questions!
Your Name
E-mail *
Phone/Whatsapp
Country
Your identity (dealer or individual)
Your Inquiry *
Clicky