EN
ES
ID
CNAcrel ADL10-E 1 Phase DIN Rail Mounted Energy Power Meter
● Reference Voltage: AC220V
● Input Current: 10（60）A Direct Connect
● Measure Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency
● Small Compact Size:1P 18mm
● Communication:RS485 (MODBUS-RTU)
● DIN Rail Installation
● LCD Display
● Certificate:IEC62053-21:2003; IEC62053-22:2003; CE; EAC
- Overview
- Parameter
- Certificates
- Customer Questions & Answers
- Contact us
Overview
ADL10-E Acrel Single phase din rail mounted electricity meter could measurement, statistic, communication and LCD display functions are installed in the power meter. This power meter has advantages of high stability, low power consumption and data saving after blackout etc. All meters meet the related technical requirements of electronic power meter in the IEC62053-21、IEC62053-22 standards.
①Outlet-wire
②RS485
③Pulse output light
④LCD Display Panel
⑤Brad&Model
⑥Neutral
⑦Enter-wire
Function
| Small Compact Size | Dimension (L*W*H): 18mm*88mm*70mm |
| Diverse Electricity Parameters Measurement | ● U (Voltage) ● I (Current) ● P (Power) ● Q (Reactive power) ● S (Apparent power) ● PF (Power factor) ● kWh (Kilowatt-hours) ● kVarh (Kilovar-hours) |
| DIN Rail Installation | 35mm standard DIN rail |
ADL10-E Acrel Single phase din rail mounted electricity meter is designed for power supply system, industrial and mining enterprises and utilities to calculate the electricity consumption and manage the electric demand. It features the high precision, small size and simple installation.
Wiring and installing
Installing notices
ADL10 single phase energy meter used the direct connecting method. Please pay attention to the direction of input and output while wiring and screw tightly (torque less than 12Nm) prevent the meter from the abnormal work.
Display instructions
The meter shows total energy first while turning on and then shows voltage, current and power, etc. in turn. The example shows as following:
Parameter
| Input voltage | Reference voltage | AC220V |
| Reference frequency | 50Hz | |
| Power consumption | <10VA | |
| Input current | Basic current | 10A |
| Maximum current | 60A | |
| Starting current | 0.004Ib | |
| Consumption | <4VA (Maximum current) | |
| Measurement performance | Accuracy of measuring | 1 Class |
| Range of measuring | 000000.00~999999.99kWh | |
| Communication | Interface | RS485(A+、B-) |
| Connection mode | Shielded twisted pair conductors | |
| Protocol | MODBUS-RTU |
Customer Questions & Answers
-
Answer:
Yes,this single phase energy meter support AC220V,under 60A it could direct connect. This meter also could save some place for you.
Liana Song January 17, 2023
-
Question:
what is the width of this model meter?
Answer:
