EN
ES
ID
CNAC 0-200A Current Transducer BA20-AI-I BA20-AI-V
● Aperture: 20mm
● Input: AC0-(40~200)A
● Analog Output: DC 0-5V/1-5V/0-20mA/4-20mA
● Overload: 1.2 times of rated value
● Power supply: DC12V/DC24V
- Overview
- Parameter
- Certificates
- Customer Questions & Answers
- Contact us
BA series Current Transducer are mainly used in industrial automation, it can measure AC current up to 600A directly.
| Technical feature | ||||||
| Type | BA05 | BA10 | BA20 | BA50 | ||
| Input | Hole diameter | Φ5mm | Φ10mm | Φ20mm | Φ50mm | |
| Current range | AC 0~10A | AC 0~50A | AC 0~200A | AC 0~600A | ||
| Overload | Continual 1.2 times; Instantaneous 10 times/5s | |||||
| Frequency | 25Hz~5KHz | |||||
| Output | Range | DC 4-20mA; 0-20mA; DC 1-5V, 0-5V | ||||
| Load resistance | Output current: ≤400Ω(12Vpower); ≤800Ω(24Vpower) | |||||
| Output voltage:≥1kΩ | ||||||
| Ripple factor | < 0.5% peak value | |||||
| Accuracy | 0.5 | |||||
| Response time | ≤350ms | |||||
| Power supply | Voltage | DC 12V or DC 24V | ||||
| Comsumption | ≤0.5VA (DC12V) ; ≤1VA (DC 24V) | |||||
| Insulation resistance | ≥ 100MΩ | |||||
| Isolation | AC 3kV/min between input and connectors | |||||
| Temperature drift | ≤ 200ppm | |||||
| MTBF | >50000h | |||||
| ENV | Work T: | -20℃ ~ +55 ℃ | ||||
| Storage T: | -20℃ ~ +70 ℃ | |||||
| Relativehumidity: | 5% ~ 95% (no condensation) | |||||
| Altitude: | < 2500m | |||||
| Mounting | 35mm standard DIN rail | |||||
Dimension
Specification
| Type | Input | Output | Option | |
| BA05-AI | AC 0.5~10A | DC 4-20mA; 0-20mA | -T: RMS measurement-1: DC12V power-2: DC24V power(If no T, sensors measure avarage value) | |
| BA05-AV | DC 1-5V, 0-5V | |||
| BA10-AI | AC 8~50A | DC 4-20mA; 0-20mA | ||
| BA10-AV | DC 1-5V, 0-5V | |||
| BA20-AI | AC 40~150A | DC 4-20mA; 0-20mA | ||
| BA20-AV | DC 1-5V, 0-5V | |||
| BA50-AI | AC 60~600A | DC 4-20mA; 0-20mA | ||
| BA50-AV | DC 1-5V, 0-5V | |||
● 1 —— + Positive power supply (not reversed)
● 2 —— - Power EARTH
● 3 —— G（Current output negative, which can be shared with the power supply）
● 4 —— IDC(Current output positive)，VDC(Voltage output positive)
Installation
Screw fixed installation
On the bottom panel of the cabinet, choose a suitable place to open two threaded holes corresponding to the position of the fixed hole of the installed sensor; After placing the sensor, install the positioning screw
Din Rail installation
Choose a suitable place to install the standard DIN35mm rail,and install the BA sensor on the rail
| Technical feature | ||||||
| Type | BA05 | BA10 | BA20 | BA50 | ||
| Input | Hole diameter | Φ5mm | Φ10mm | Φ20mm | Φ50mm | |
| Current range | AC 0~10A | AC 0~50A | AC 0~200A | AC 0~600A | ||
| Overload | Continual 1.2 times; Instantaneous 10 times/5s | |||||
| Frequency | 25Hz~5KHz | |||||
| Output | Range | DC 4-20mA; 0-20mA; DC 1-5V, 0-5V | ||||
| Load resistance | Output current: ≤400Ω(12Vpower); ≤800Ω(24Vpower) | |||||
| Output voltage:≥1kΩ | ||||||
| Ripple factor | < 0.5% peak value | |||||
| Accuracy | 0.5 | |||||
| Response time | ≤350ms | |||||
| Power supply | Voltage | DC 12V or DC 24V | ||||
| Comsumption | ≤0.5VA (DC12V) ; ≤1VA (DC 24V) | |||||
| Insulation resistance | ≥ 100MΩ | |||||
| Isolation | AC 3kV/min between input and connectors | |||||
| Temperature drift | ≤ 200ppm | |||||
| MTBF | >50000h | |||||
| ENV | Work T: | -20℃ ~ +55 ℃ | ||||
| Storage T: | -20℃ ~ +70 ℃ | |||||
| Relativehumidity: | 5% ~ 95% (no condensation) | |||||
| Altitude: | < 2500m | |||||
| Mounting | 35mm standard DIN rail | |||||
Customer Questions & Answers
-
Question:
Who are we?
Answer:We are a top manufacturer with over 1500 employees, over 300 R&D engineers in China, with CE, ROHS, IEC, EAC, MID, UL, FCC Certificates, etc. Our Products: AC/DC electricity meters, current transformers, hall sensors, IOT platform, etc. As a top-level provider of electrical solution service, we can help you save energy, reduce cost, improve energy efficiency and safety, realize intelligent, visual and fine management of energy, and provide data services for energy management.
marry August 25, 2022
-
Question:
How can we guarantee quality?
Answer:Always a pre-production sample before mass production; Always final Inspection before shipment;
marry August 25, 2022 -
Question:
What can you buy from us?
Answer:AC/DC Energy Meter, Hall Effect Sensor, Current Transformer, Current Transducer, Motor Protectors, Wireless Temperature Monitoring, Residual Current Relay, IOT Platform, etc.
marry August 25, 2022 -
Answer:
147 computer software copyrights, 2 million meters, 1.5 million transformers, more than 100 design patents, 70 utility model patents.
marry August 25, 2022 -
Question:
What services can we provide?
Answer:Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDU, Express Delivery, etc. Accepted Payment Currency: USD, EUR, RMB, etc. Accepted Payment Type: T/T, L/C, etc. Language Spoken:English, Spanish, Chinese, etc.
marry August 25, 2022
